• This topic is empty.
Viewing 15 posts - 1 through 15 (of 40 total)
  • Author
    Posts
  • #6339 Reply
    junkowherry
    Guest
    Up
    0
    Down

    Tungsten concentrates decomposition method has fire method and wet
    method.

    Purification of tungsten compound

    The
    silicon, phosphorus and arsenic impurities in sodium tungstate solution are
    presenting in sodium silicate, sodium hydrogen phosphate and sodium hydrogen
    arsenate state. Boiling solution and neutralized with dilute hydrochloric acid,
    when the solution pH is 8-9, the sodium silicate hydrolyze into silicate
    condensation precipitation, add magnesium chloride and ammonium chloride
    solution, make the phosphorus, arsenic generate a very small solubility of
    magnesium ammonium phosphate and arsenate ammonium magnesium precipitation
    removed. Add sodium sulfide to the sodium tungstate solution, molybdenum first
    form the thiosulfate molybdate with tungsten, neutralized with hydrochloric
    acid, make the solution pH from 2.5 to 3.0, molybdenum was formed of insoluble
    precipitates molybdenum trisulfide removed. In the purified sodium tungstate
    solution add calcium chloride solution to obtain calcium tungstate (CaWO)
    precipitation (ie synthetic scheelite), with hydrochloric acid decompose
    calcium tungstate precipitation gets the industrial tungsten acid, at 700 ~ 800
    calcination, get industrial pure tungsten trioxide. If preparing chemically
    pure tungsten trioxide, can be dissolved industrial tungstic acid in aqueous
    ammonia, obtained ammonium tungstate solution, silicon and other impurities
    remain in the slag. The solution through evaporated and crystalline treatment,
    obtains a sheet-like ammonium paratungstate crystal. As the solubility of
    ammonium paramolybdate greater than ammonium paratungstate, after
    crystallization, ammonium paratungstate crystal was reduced molybdenum content.
    After the ammonium paratungstate dried, calcined at 500 ~ 800,
    can be obtained chemically pure tungsten trioxide. In 70s, use tertiary amine
    method to make sodium tungstate solution convert into ammonium tungstate
    solution, simplifying the process and improve the recovery of tungsten.

    Preparation of tungsten powder

    In
    industry, use the method of hydrogen reducing tungsten trioxide or ammonium
    paratungstate to prepare tungsten powder. Reduction process depends on the
    product tungsten powder particle size, particle size composition and oxygen
    requirements. Hydrogen reduces tungsten trioxide preparing tungsten powder is
    generally taken two steps: first in the 550 ~ 800
    reduce tungsten trioxide into tungsten dioxide, and then at 750 ~ 900
    reduce tungsten dioxide into tungsten powder.
    Should you adored this informative article and also you wish to acquire more info regarding black purple ring kindly stop by our own site.
    Also be the first pass into
    hydrogen or not to reduce paratungstate into blue tungsten oxide (blue
    tungsten), and then use hydrogen to reduce into tungsten powder. Tungsten
    powder’s particle size, particle size composition is tungsten powder’s
    important indicator of quality. The reduction reaction was conducted in the
    rotary tube furnace or electric furnace.

    Dense tungsten preparation

    through forming, sintering, melting and other processing obtains
    dense tungsten. The forming is taking tungsten powder into the steel die,
    pressed into the billet or a compact with hydraulic pressure. Large briquettes
    use liquid and other static pressure method molding, can be obtained more
    uniform density compact. Tungsten billet sintered divided into two steps: first
    in the 1100 ~ 1200 temperature sintering, then the current directly through the
    billet for vertical melting (ie, high temperature sintering). The density of
    through vertical melting tungsten was not to17-19
    g/cm. Small shaped, different shaped and large shaped tungsten
    compacts sintered usually use radiant heating or induction heating method to
    achieve the sintering required high temperature, at this time, do not have to
    completely separate operation low-temperature sintering and high-temperature
    sintering. While preparing large tungsten ingots usually use a vacuum or inert
    gas protection arc melting method and an electron beam melting method. Prepare
    high purity dense tungsten is usually use electron beam melting purified.
    Electron beam melting also can be obtained tungsten single crystals, the purity
    was up to 99.99% or more.

    #7133 Reply
    QM
    Guest
    Up
    0
    Down

    auto insurance quote
    get insurance quotes
    acceptance auto insurance
    auto insurance quotes online
    online auto insurance companies

    #7169 Reply
    LC
    Guest
    Up
    0
    Down

    auto insurance compare
    auto insurance quote
    auto insurance companies
    progressive auto insurance
    auto insurance online quote

    #7247 Reply
    ER
    Guest
    Up
    0
    Down

    direct auto insurance
    auto insurance compare rates
    car insurance quotes
    auto insurance agent
    auto insurance connecticut

    #7337 Reply
    HC
    Guest
    Up
    0
    Down

    Greetings! This is my 1st comment here so I just wanted to
    give a quick shout out and tell you I genuinely enjoy
    reading your posts. Can you recommend any other blogs/websites/forums that deal with
    the same topics? Thank you!
    Hosea

    préstamos y créditos rápidos online

    #7342 Reply
    QW
    Guest
    Up
    0
    Down

    nj auto insurance
    car insurance quotes online
    online auto insurance companies
    quote auto insurance
    quote auto insurance

    #7370 Reply
    ZT
    Guest
    Up
    0
    Down

    This is really interesting, You are a very skilled blogger.
    I have joined your feed and look forward to seeking more of your wonderful post.
    Also, I have shared your site in my social networks!

    Lovie

    préstamos y créditos rápidos online

    #7374 Reply
    CV
    Guest
    Up
    0
    Down

    auto insurance agent near me
    auto insurance agency near me
    mexican auto insurance
    car insurance quotes comparison online
    insurance car

    #7433 Reply
    BX
    Guest
    Up
    0
    Down

    Cool blog! Is your theme custom made or did you download it from somewhere?

    A design like yours with a few simple adjustements would really make
    my blog jump out. Please let me know where you got your design. Many thanks
    Virgilio

    préstamos rápidos y créditos online! primero 0% hoy

    #7483 Reply
    TM
    Guest
    Up
    0
    Down

    auto car insurance
    car insurance agencies
    commercial auto insurance
    auto insurance coverage
    car insurance quotes

    #7498 Reply
    LV
    Guest
    Up
    0
    Down

    automobile insurance
    insurance
    get car insurance quote
    auto insurance quotes
    automobile insurance

    #7557 Reply
    PT
    Guest
    Up
    0
    Down

    Hi there, I desire to subscribe for this weblog to get most up-to-date updates, so where can i do it
    please assist.
    Corina
    http://gravetramp.blogspot.com/2005/04/ono-3-megas.html

    #7569 Reply
    HN
    Guest
    Up
    0
    Down

    Hello there, just became alert to your blog through Google, and found
    that it’s truly informative. I’m gonna watch out for brussels.
    I’ll be grateful if you continue this in future.

    Numerous people will be benefited from your writing.
    Cheers!
    Stephan

    Los Mejores Lectores De Ebooks O Ereaders CaracteríSticas Y Precios

    #7576 Reply
    BX
    Guest
    Up
    0
    Down

    auto insurance comparison
    best auto insurance companies
    automobile insurance
    get insurance quotes
    auto insurance quotes

    #7664 Reply
    RI
    Guest
    Up
    0
    Down

    advantage auto insurance
    car insurance agents
    auto insurance near me
    online car insurance
    auto insurance companies near me

Viewing 15 posts - 1 through 15 (of 40 total)
Reply To: Tungsten smelting
Your information: